about boon

About BOON

Researchers

Projects

Partners

sensor platforms

Shoreline Observations

Offshore Mooring and Buoy Observations

High Frequency Radar

Vessel Based Observations

Resident Platforms

Products + Tools

All Real Time Observations

Sea Surface Currents

Research Products

Resource Managers

Recreation and Coastal Conditions

data

Summary of Data Sets

Data Access

Data Disclaimer & Terms of Use

Offshore Mooring and Buoy Observations > BML offshore buoy

 

May 2017: The BML Buoy is currently off-line for service.

  • Latest Values
  • Plots
  • Dissolved Oxygen (30 m)
  • Instruments/Sensors
  • Data Access
BML Buoy Seawater Observations
Buoy Seawater Temperature (deg F)
Buoy Seawater Temperature (deg C)
Buoy Seawater Salinity (PSU)
Buoy Seawater Fluorescence (ug/l)
Buoy Seawater Dissolved Oxygen
Buoy Seawater Oxygen Saturation
Buoy Seawater Turbidity (NTU)
Buoy Seawater Conductivity (S/m)
Last update: Fri May 26 05:40:00 2017 PDT

Also see ShoreStation Seawater Observations >

Buoy DescriptionBML Buoy

Bodega Marine Laboratory operates an oceanographic buoy on the 30m isobath, immediately offshore from the Lab. Deployed in December 2009, the buoy provides data on currents at all depths down to 25m (85ft), seawater temperature, salinity, chlorophyll fluorescence, light transmissivity, dissolved oxygen, pCO2 and pH.

Deployed 7/10 to present

For data from 8/04-1/08 see Former BML Mooring and Buoy

BML Buoy Seawater Observations - Plots

BML Buoy Comparison Temperature DegF

BML Buoy WQM Temperature DegF

BML Buoy WQM Temperature DegC

BML Buoy WQM Salinity PPT

BML Buoy WQM Chloropyll ugpl

BML Buoy WQM Dissolved Oxygen Units

BML Buoy WQM Oxygen Saturation Units

BML Buoy WQM Chloropyll ugpl

BML Buoy WQM Conductivity spm

 

[TOP]

Dissolved Oxygen Measurement @ 30 m depth

July 2013 - Apr 2015

- Preliminary data -

DO

Seawater Temperature, Conductivity & Salinity

wqm wqm

Instrument Type: Wetlabs Water Quality Monitor (WQM), with Seabird Conductivity cell and thermistor (similar to SBE 37 microcat or SBE 52 moored CTD)

Description: Temperature is acquired by applying an AC excitation to a bridge circuit containing an ultra-stable aged thermistor and VISHAY precision resistors.  Conductivity is acquired using an ultra-precision Wein-Bridge oscillator to generate a frequency output in response to changes in conductivity.  Salinity values are calculated from the 1978 Practical Salinity Scale Equations.

Location: Approx. 1.2 km off Bodega Head at a depth of 1 m
Latitude 38° 18’ 42.5” N
Longitude 123° 04’ 58.9” W

Installed: July 2010 – present

Specifications: Temperature
Range: -5 to +35 deg C
Res: 0.001 deg C
Acc: 0.002 deg C

Specifications: Conductivity
Range: 0 to 9 S/m
Res: 0.0005 S/m
Acc: 0.0003 S/m

Acquisition Settings:
Sample Interval: 10 minutes
Pump installed

Dissolved Oxygen

Instrument Type: Wetlabs Water Quality Monitor (WQM), with Seabird Electronics Dissolved Oxygen Sensor (SBE 43) installed.

Description: The SBE43 is a polarographic membrane oxygen sensor that includes an anode and a cathode, separated by a membrane. As oxygen diffuses across the membrane, the cathode supplies electrons to a reaction that converts O2 molecules to hydroxyl ions (OH-). The sensor measures the number of electrons that were supplied by the cathode for the reaction, and outputs a voltage (0-5V) that is proportional to this current flow. The voltage is then converted to oxygen concentration using a modified version of the Owens-Millard algorithm (1985). (See SBE application note 64 for more information).

Location: Approx. 1.2 km off Bodega Head at a depth of 1 m
Latitude 38° 18’ 42.5” N
Longitude 123° 04’ 58.9” W

Installed: July 2010 – present

Specifications: Dissolved Oxygen
Range: 0-120%
Res: 0.01 mg/L
Acc: 0.1 mg/L

Acquisition Settings:
Sample Interval: 10 minutes

Chlorophyll Fluorescence, Turbidity, and Backscattering Data

Instrument Type: Wetlabs Water Quality Monitor (WQM), with a Welabs ECO- FLNTUS (combination chlorophyll fluorescence and turbidity meter) installed

Description: The Environmental Characterization Optics or ECO miniature fluorometer allows the user to measure relative chlorophyll concentrations by directly measuring the amount of fluorescence emission in a sample volume of water. The ECO uses an LED to provide the excitation source. An interference filter is used to reject the small amount of out-of-band light emitted by the LED. The light from the source enters the water volume at an angle of approximately 55 – 60° with respect to the end face of the unit.  Fluoresced light is received by a detector positioned where the acceptance angle forms a 140° intersection with the source beam. An interference filter is used to discriminate against the scattered excitation light.

To determine turbidity, the unit simultaneously emits light at 700nm and subsequently detects how much of that light is scattered by particles in the water.

Location: Approx. 1.2 km off Bodega Head at a depth of 1 m
Latitude 38° 18’ 42.5” N
Longitude 123° 04’ 58.9” W

Installed: July 2010 – present

Specifications: Fluorometer
Excitation Wavelength: 470 nm
Emission Wavelength: 695 nm
Range: 0-50 ug/L
Acc: 0.2% Factory Standard (FS) ug/L
Prec: 0.04% FS ug/L
Linearity: 99% R2

Specifications: Turbidity
Wavelength: 700 nm
Range: 0-25 Nephelometric Turbidity Units (NTU)
Acc: 0.1 FS NTU
Prec: 0.04% FS NTU

Acquisition Settings:
Sample Interval: 10 minutes

Dissolved Oxygen

miniDOTInstrument Type: Precision Measurement Engineering (PME) miniDOT

Description: The dissolved oxygen sensor is an optode that measures lifetime-based luminescence quenching of fluorescence of a thin membrane.

Location: Approx. 1.2 km off Bodega Head at a depth of 30 m
Latitude 38.311995° N
Longitude -123.083368° W

Installed: 8 July 2013 - present

Specifications: Dissolved Oxygen
Range: 0 - 150% saturation
Resolution: 0.05 micromole/l or better
Accuracy: ± 10 micromole/l or ± 5%

Specifications: Temperature
Range: 0 to 30 (°C)
Resolution: 0.01 (°C)
Accuracy: ± 0.10 (°C)

Acquisition Settings:
Sample interval = 10 minutes
Sensor retrieved and downloaded monthly

pH

sami pH

Instrument Type: Sunburst Systems Submersible Autonomous Moored Instrument for pH (SAMI-pH)

Description: pH is a measurement of the acidity or basicity of a solution. The SAMI uses reagent based colorimetry to determine the pH of a given sample of seawater. Water is drawn into the instrument, mixed with the indicator m-cresol-purple (mCP) using a 350 ul static mixer, and absorbances at three wavelengths (434, 578, and 780) are recorded. pH is then calculated using these data, temperature, blanks measured at all 3 wavelengths, and the molar absorptivities for mCP. The final pH is calculated for each absorbance data point and a linear extrapolation to pH at zero indicator concentration is calculated from the point pH, which eliminates perturbation of the indicator. Accuracy is tested with Tris buffer from A.G Dickson’s lab at Scripps Institute of Oceanography.

Location: Approx. 1.2 km off Bodega Head at a depth of 1 m
Latitude 38° 18’ 42.5” N
Longitude 123° 04’ 58.9” W

Installed: intermittent

Specifications: SAMI-pH
Range: 7-9
Salinity Range: 30-36
Acc: +/- 0.003 pH units
Prec: <0.001 pH units

Acquisition Settings:
Sample Interval: 60 minutes

pCO2

sami

Instrument Type: Sunburst Systems Submersible Autonomous Moored Instrument for CO2 (SAMI-CO2)

Description: The SAMI-CO2 uses reagent-based colorimetry to determine the partial pressure of CO2 in seawater. Indicator solution (bromothymol blue) is pumped into a tubular gas permeable membrane where it is allowed to equilibrate with seawater pCO2 for a specific period of time. It is then pumped into a flow cell, illuminated, and absorbances are measured for three different wavelengths (440, 620, 715) using three photodiode detectors that correspond to each wavelength. pCO2 is then calculated using these data, under light and dark conditions, temperature, blanks measured at all 3 wavelengths, and the molar absorptivities for bromothymol blue. The SAMI-CO2 is calibrated using different CO2 gas concentrations, diluted from a Linde primary standard grade 1,600 ppm CO2 gas standard.

Location: Approx. 1.2 km off Bodega Head at a depth of 1 m
Latitude 38° 18’ 42.5” N
Longitude 123° 04’ 58.9” W

Installed: intermittent

Specifications: SAMI-CO2
Range: 150-1500 uatm
Accuracy: +/- 3 ppm based on lab calibration
Precision: < 1 ppm

Acquisition Settings:
Sample Interval: 60 minutes

Acoustic Doppler Current Profiler - Current Velocity and Direction

BML mooring adcp platform BML mooring adcp platform

Instrument Type: RD Instruments 600-kHz Workhorse Sentinel

Description: Acoustic Doppler Current Profiler (ADCP) produces a vertical profile of current velocities. The ADCP transmits sound at a fixed frequency and listens for the Doppler (frequency) shift in the echoes returning from sound scatters in the water. The ADCP uses multiple beams pointed in different directions to compute water velocities in three dimensions. Echoes with different delays allow measurements of current velocities at different depths.

Location: Approx. 1.2 km off Bodega Head at a depth of 1 m
Latitude 38° 18’ 42.5” N
Longitude 123° 04’ 58.9” W

Installed: July 2010 – present

Specifications:
For depth cell = 2m,
Depth range: 47m
Standard Deviation: 3 cm/s
Velocity range: +/- 500 cm/s
Accuracy: 0.3% of the water velocity +/- 0.3 cm/s
Compass (fluxgate) range: 0-360°, from magnetic north
Accuracy: 2°

Acquisition Settings:
720 pings per ensemble
6 minute ensemble, hourly
1st Bin Range: 3.08m
Bin Size: 2m
Number of Bins: 18

Please see Data Access for available data sets.